Aaron Baker
| Aaron Baker | |
| Occupation | Leak detection engineer |
|---|---|
| Employer | ADI Leak Detection |
| Based in | Bexhill-on-Sea, East Sussex |
| Regions covered | Greater London, South East and East Anglia |
| Counties covered | 8 |
| Specialisms | Plumbing and Heating; Water Mains |
| Plumbing and Heating | 15 years |
| Leak Detection | 6 years |
| Qualifications | NVQ Level 2 Plumbing; Level 2 NVQ in Mechanical Engineering Plumbing; City and Guilds Level 2 in Basic Plumbing; Level 3 in Plumbing Studies |
| Leak investigations completed | 80 (since 2026) |
Aaron Baker is a leak detection engineer employed by ADI Leak Detection, the trading name of ADI Leak Solutions Ltd.[1][2] Based in Bexhill-on-Sea, East Sussex, Baker carries out leak investigations across Greater London, South East and East Anglia, covering eight counties in total.[1] ADI describes his specialisms as plumbing and heating, and water mains, and records 15 years in plumbing and heating alongside his leak detection work.[1] ADI records 80 completed leak investigations for him since 2026.[1][2] He is one of the two most recently added engineers on ADI's site, with jobs recorded from 2026.[1][2]
Background and experience[edit]
ADI records Aaron Baker as having 15 years in plumbing and heating and 6 years in specialist leak detection.[1] It attributes 80 completed leak detection jobs to him since 2026, the lowest total published for any of its engineers.[1][2] He holds an NVQ Level 2 in Plumbing, a Level 2 NVQ in Mechanical Engineering Plumbing, a City and Guilds Level 2 in Basic Plumbing and a Level 3 in Plumbing Studies.[1]
Qualifications[edit]
ADI publishes the following qualifications for Aaron Baker: NVQ Level 2 Plumbing, Level 2 NVQ in Mechanical Engineering Plumbing, City and Guilds Level 2 in Basic Plumbing and Level 3 in Plumbing Studies.[1] The company states that it holds accreditation with the Chartered Institute of Plumbing and Heating Engineering and membership of the Water Industry Approved Plumbers Scheme, and that its engineers work under £5 million of public liability insurance.[1][2]
Specialisms and methods[edit]
Baker works on central heating and underfloor heating systems, water mains, bathroom plumbing, drains and underground pipework.[1] ADI describes his work as covering straightforward internal leaks through to more complex underground supply pipe investigations, and records him as particularly known for plumbing and heating work.[1] His listed detection methods are tracer gas, acoustic listening equipment, thermal imaging, borescope cameras and moisture meters.[1]
Areas covered[edit]
ADI lists Baker as covering eight counties: Berkshire, East Sussex, Essex, Greater London, Hampshire, Kent, Surrey and West Sussex.[1] The company groups these as Greater London, South East and East Anglia.[1][2] Coverage is published at county level; the site does not state that he works every part of every county listed.
Documented case studies[edit]
ADI publishes nine leak investigations attributed to Aaron Baker: three central heating leaks, two internal cold mains leaks, two underground mains leaks, one rainwater drainage leak and one towel radiator leak.[1] The locations given are Camberwell, Whitstable, Gravesend, Folkestone, Herne Bay, Biggin Hill, Otford and Southampton.[1] Recorded outcomes include "Leaking 15mm fitting found and repaired beneath bathroom floor" at Camberwell, "Leak traced to towel radiator valve, repaired by tightening" at Whitstable and "Leak found behind sink unit wall, repaired same visit" at Gravesend.[1] The site publishes a summary of each investigation rather than a full report.
See also
- ADI Leak Detection
- Tracer gas leak detection
- Acoustic leak detection
- Thermal imaging
- Borescope inspection
- Trace and access
- Leak detection in East Sussex